The MotorMAX Advantage
Faster warm up: In a thermostat controlled cooling system,
MotorMAX will absorb the heat of internal engine components and
transfer it evenly throughout the engine. Since water with MotorMAX
is acting like a heat sink, engine temperatures will rise faster,
reducing both the time for warm-up and cold start wear and tear.
In addition, cab heater output is noticeably improved in severe
cold due to MotorMAX's ability to carry more heat through the heater
core than standard coolant mixtures.
Reduced water temperature: Once the thermostat opens,
MotorMAX will transfer the heat it has absorbed into the radiator.
MotorMAX's ability to discharge heat dramatically when exposed
to airflow allows the radiator to more efficiently remove heat
from the MotorMAX/coolant mixture. Individual results vary depending
on the size and volume of your cooling system. In a variety of
applications, MotorMAX has reduced engine temperatures an average
of 15-20 degrees, with reductions of up to 30 degrees seen in
select installations.
Reduced internal engine parts temperature: Acting
like a heat sink, MotorMAX has the ability to absorb heat from internal
engine parts. Reducing operating temperatures of internal parts
has a major impact on wear and tear. This becomes critical in the
life span of such major internal components as valve springs, wrist
pins, cylinder walls and pistons.
Reduced oil temperature: MotorMAX, by absorbing heat from
internal engine parts, will also help to reduce engine oil temperatures.
Reduced oil temperature results in less chance of oil breakdown,
decreasing damage caused by poor lubrication. Minimizes hot spots
in engines: All engines have some variance in engine temperature
from front to back or side-to-side. With its ability to absorb
heat and transfer it, MotorMAX reduces engine hot spots and virtually
eliminates steam pockets. The ability to reduce hot spots is vital
in the search for enhanced engine performance.
More comfortable passenger compartment temperatures: Now
that your engine and many of its components are running cooler,
the reduced temperature translates to cooler engine bay temperatures.
This results in a more comfortable cab interior, with substantially
increased air conditioning output in hot weather.
Reduces engine temperature rise at idle: MotorMAX will
keep your water temperature lower in conditions where there is
little or no airflow. With its ability to pull more heat out of
the engine and into the radiator, MotorMAX helps keep your engine
cooler while sitting still or at prolonged periods of high idle.
Why MotorMAX in my commercial or fleet vehicle? : Commercial
or fleet vehicles are subject to particularly severe operating conditions,
exposing them to above-average temperature ranges and increased
life-cycle operating demands. Through reduced engine bay temperatures,
additional benefits of MotorMAX include:
- Prolonged component life
- Reduced transmission operating temperature through cooler transmission
oil temperatures.
- Increased useable alternator amperage output.
- Increased air conditioning efficiency, particularly critical
with R-134 coolant systems.
- More efficient fuel combustion through equalized cylinder temperatures,
enhancing engine performance and fuel economy.
Easy to clean up and environmentally friendly: MotorMAX
is a plant-based product that is non-toxic and biodegradable. When
spilled, it is simple to clean up and presents no disposal hazards.
MotorMAX is the environmentally friendly wave of the future in cooling
system additives!
|
